Industry News- Zhejiang Eaed Technology Development Co., Ltd.

Jul 08, 2026

Can the Mist Sprayer handle both water-based and oil-based liquids without the internal plastic components degrading?

It depends on the materials used in the mist sprayer's internal components. Most standard mist sprayers are designed primarily for water-based liquids and can degrade when exposed to oil-based formulas over time. However, certain mist sprayers — specifically ...

Jul 01, 2026

How Does the Trigger Sprayer Pump Work?

Design & Engineering — Field Notes The Quiet EngineeringBehind Every Spray A closer look at the trigger sprayer — a small mechanical object most people touch daily and almost never think about. What follows is an editorial walk through its mechanics, its ...

Jun 22, 2026

What are the dispensing differences between a foaming-type system and a standard Lotion Pump Dispenser for viscous lotions?

The key conclusion is that a foaming-type system is generally not suitable for viscous lotions, while a standard Lotion Pump Dispenser is specifically designed to handle thicker formulations with controlled, consistent output. For products such as a thick lot...

Jun 16, 2026

What is the flow rate difference between a plastic trigger sprayer and a fine mist sprayer for fragrance use?

When choosing between a plastic trigger sprayer and a fine mist sprayer for fragrance applications, the core difference comes down to flow rate and droplet size. A standard plastic trigger sprayer typically delivers 0.8 to 1.5 mL per stroke, while a fine mist...

Jun 08, 2026

How accurate is the spray pattern of this Trigger Sprayer compared to other fine-mist sprayers?

In direct comparison with typical fine-mist sprayers, this Trigger Sprayer provides highly accurate and consistent spray patterns. Its precision-engineered trigger spray head delivers uniform droplet distribution and minimal overspray, achieving over 90% cove...

Jun 02, 2026

Does the Fine Mist Sprayer maintain consistent mist quality as the bottle empties?

The Fine Mist Sprayer maintains stable mist quality during most of its usage cycle, but the consistency can slightly decline when the bottle is near empty due to reduced internal pressure and less efficient liquid pickup. However, in well-designed systems suc...

May 25, 2026

What are the advantages of a Fine Mist Sprayer over traditional perfume atomizers in fragrance consistency?

The Fine Mist Sprayer delivers significantly more consistent fragrance application than traditional perfume atomizers because it produces smaller, more uniform droplets, typically in the range of 20–50 microns, compared to the wider and less stable droplet ra...

May 19, 2026

How does the output consistency of this Plastic Trigger Sprayer compare to continuous-spray trigger sprayers when used over a long session?

When comparing output consistency between a standard plastic trigger sprayer and a continuous-spray trigger sprayer over a long session, the standard plastic trigger sprayer delivers more controlled, on-demand output per stroke, while the continuous-spray mod...

May 13, 2026

How does the plastic sprayer perform in low temperatures — does the tank become brittle compared to a fiberglass sprayer in winter conditions?

Plastic sprayers can become brittle in low temperatures, but the degree depends heavily on the type of plastic used. Standard polypropylene (PP) plastic sprayers begin to show increased brittleness at temperatures below 0°C (32°F), while fiberglass sprayers m...

May 06, 2026

How does the output volume of this Lotion Pump Dispenser compare to a standard trigger sprayer for body lotions?

When choosing between a lotion pump dispenser and a standard trigger sprayer for body lotions, output volume is one of the most critical differences. A typical lotion pump dispenser delivers 0.5 ml to 2 ml per press, while a standard trigger sprayer outputs 0...

Apr 23, 2026

Is the Mist Sprayer bottle made of HDPE, PETG, or borosilicate glass?

The material of a mist sprayer bottle directly determines its chemical compatibility, durability, weight, and suitability for specific liquids. Most mist sprayers on the market use one of three primary materials: HDPE (High-Density Polyethylene), PETG (Polyet...

Apr 15, 2026

Is the High Output Lotion Pump compatible with high-viscosity products such as thick body butters, dense creams?

The High Output Lotion Pump is specifically engineered to handle high-viscosity formulations, including thick body butters, dense creams, heavy lotions, and gel-based products. Unlike standard dispensing pumps that clog or deliver inconsistent volumes when fa...

Web Menu

Product Search

Language

Exit Menu

Web Menu

Product Search

Language

Share

Exit Menu